Electrolytic Capacitor Question

[Platefire]

In you have an application that requires a cathode bypass cap for 25/25 but you use a 25/35 or 25/50, as I recall the extra voltage capacity has no effect on its ability to perform the same task in that location-----right? Higher is OK, just don't go lower---this is what I think I remember, somebody please verify--before I install. Platefire   

[alerich]

You are correct.

[stratele52]

Yes Higher is ok .

Sometimes higher voltage capacitor are bigger and more expensive, not always . I bought some Sprague  25 mfd 50 volts cheaper than the 25 volts .

[Platefire]

OK, good. Thanks! Platefire