Scratch and Dent sale on Transformers

[EL34]

I have a bunch of transformers that I have sat aside over the years that came in with dents in the endbell covers
There is nothing wrong with the transformers, just a dented endbell
You can pull off the endbell and use a block of wood and a hammer to fix the dent

It cost more to ship them back than if I just blow them out at a huge discount

PM me if you want any of the transformers shown below
Include the part number you want

What I will have you do is go to my shopping cart and add one to the shopping cart, then check out
I will adjust the transformer price when I receive the order
Add a note to your order that this is for a dented transformer
This way I have all your info and am ready to ship your order.

This is my shopping cart transformer page
http://hoffmanamps.com/MyStore/catalog/parts1.htm

Go here to see the transformer specs
http://el34world.com/Transformers/fentrans.htm - Fender style transformer specs

http://el34world.com/Transformers/marshall.htm - Marshall Style transformer specs

[EL34]

1 sold - Quantity 4 left

Bassman output transformers
Or any 40 ish watt 2 x 6L6 amp

Part number 022855 - $45 each

See the specs page links in post #1

[EL34]

5 x Twin and Twin Reverb power transformers - 3 sold - 2 left
Part number 022756 - $70 each

See the specs page links in post #1

[DummyLoad]

twin PT specs for PSU designer if anyone cares to have them:


blk - wht                120Vrms N.L.; 1.2DCR
red - red/yel          339Vrms N.L.; 11.7DCR   <<--- use these values for full wave CT. 
red - red                680Vrms N.L.; 22DCR
red/yel - red/blu      61Vrms N.L.; DCR not measured.
grn - grn                7.08Vrms N.L.; 0.5DCR


measured with a very fine kind of fluke 87 *true* RMS DMM.


--pete

[EL34]

Thanks for the info Pete