6v6 Plexi Build Problem

[GS1100]

Hey guys, trying to get a 6v6 plexi off of the ground. I get no sound static, hum or otherwise. Voltages look good except for V3: pin 1 193V, pin 6 188V, pins 3 and 8 81V. Same numbers with different tubes. I've double checked my wiring and component values, all good. Voltage off of the 3rd filter cap (C in the schematic) is 260V, 4th cap is 224V. Any ideas?

[shooter]

pins 3 and 8 81V

guessing one of your "tail" R's is wrong.  Could also disconnect the NFB for testing, the other values seem * close enough* for now.