Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> 56K resistors on the two Screen Caps ?
<< Prev Topic | Next Topic >>
Author Comment
aerojazz
Senior tube assistant
Posts: 157
(3/5/04 12:34 pm)
56K resistors on the two Screen Caps ?
--------------------------------------------------------------------------------
The 56K resistors on the two Screen Caps (100 watt SuperLead) are the necessary?
Can I sub some other val?
I dont have any on hand.
Edited by: aerojazz at: 3/5/04 12:52 pm
GroundhogKen
Forum Moderator
Posts: 2307
(3/5/04 1:35 pm)
Re: 56K resistors on the two Screen Caps ?
--------------------------------------------------------------------------------
They are necessary to insure that both series cap share the total voltage--rather than one cap taking the full B+ while the other remains uncharged.
I'm sure you could get away with some plain old 1/2 watt 220K resistors while you wait for the correct parts.
Ken
aerojazz
Senior tube assistant
Posts: 158
(3/5/04 2:16 pm)
Re: 56K resistors on the two Screen Caps ?
--------------------------------------------------------------------------------
whew, relief, thanks again...
How bout two 5 watt 100K in parallel (each)?
Edited by: aerojazz at: 3/6/04 10:46 am
GroundhogKen
Forum Moderator
Posts: 2309
(3/6/04 10:55 am)
Re: 56K resistors on the two Screen Caps ?
--------------------------------------------------------------------------------
That works.
I don't think the value is critical. You could just use two 100K 5 watters -- no real need to parallel them to 50K.
Ken
<< Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.