New Lead and Bass 50

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > New Lead and Bass 50      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
JimiB
Junior tube assistant
Posts: 36
(3/9/04 4:24 pm)
 New Lead and Bass 50
--------------------------------------------------------------------------------
 I am helping a young friend build a Lead and Bass 50 and we fired it up for the first time today everything looks good (now that we added the wires to pin 6 of the el-34's from the bias circuit that he forgot) except we are seeing 350v on pin one of V3 (p.i.) and 170v on pin 6 also the amp is very quiet (maybee we killed the power tubes I redplated them several time trying to solve the bias circuit problem)
Any Ideas on the P.I. voltage issue?
 
PHATamps
I only work on tube amps
Posts: 426
(3/9/04 9:15 pm)
 Re: New Lead and Bass 50
--------------------------------------------------------------------------------
 Are the cathodes of the PI jumpered together? Also, double-check the values of the PI plate loads.
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.