Fulltone TTE pre-amp schematic?

[markmalin]

I've been playing around with a used Fulltone Tube Tap Echo I just bought.  Aside from the delay, I love the tone/drive you can get from the pre-amp.  I tend to use effects lightly if at all, so it got me thinking.  Maybe building a stand alone pre-amp/buffer based on his pre-amp would really be a useful project?  I've been running my effects like:


guitar --> pedal board --> Fulltone TTE --> Amp (5E3 based)


and really dig the punch and warmth I get having the TTE sort of "recover" the tone after the effects losses in the pedal board.


Anyhow, anyone know where there is a schematic for the TTE available?  I did some searching and didn't find anything.


Humbly,
Mark

[pompeiisneaks]

No schematic, but here's some gut shots if you want to try and guess at it :P

http://www.harmonycentral.com/forum/forum/guitar/acapella-29/1878576-

~Phil

[markmalin]

No schematic, but here's some gut shots if you want to try and guess at it :P

http://www.harmonycentral.com/forum/forum/guitar/acapella-29/1878576-

~Phil

Thanks, Phil.  Interesting... I thought about opening mine up and trying to reverse engineer it, but it sure would make it a lot easier to look at the schemo :)  I appreciate the link, though.

[pompeiisneaks]

You could also take a photo, post here, and a collaborative effort could be made to reverse engineer it ;)

~Phil

[markmalin]

You could also take a photo, post here, and a collaborative effort could be made to reverse engineer it ;)

~Phil

Not a bad idea.  Dang...every time I play this thing...it adds so much warmth and punch to the tone of my 5E3, I love it!