current draw of Dougs LED lamp

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > current draw of Dougs LED lamp      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
embotone
Junior tube assistant
Posts: 17
(3/13/04 1:48 pm)
 current draw of Dougs LED lamp
--------------------------------------------------------------------------------
 I want to add a power light to a preamp I have. It uses 2 12AU7s with a little power transformer that doesn't look like it has much extra capacity. Do I understand correctly from looking at Doug's website that his LED in series with the recommended 180 ohm resistor will draw an extra 25ma of current?
 
ganzonimx
Hey get your own solder
Posts: 430
(3/13/04 9:31 pm)
 curretn draw
--------------------------------------------------------------------------------
 Yes it does draw about 25mA fom the 6.3V winding. That should be no problem.

Cris
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.