Looking for Deluxe Reverb Standard Visio Layout

[drumslinger2000]

Good Day All,


    Would anyone happen to have a Visio file of a standard AB763 circuit board?  Maybe something similar in the neighborhood?


Regards,


C

[VMS]

Here's a pdf, maybe bnwitt has got visio files too:


http://el34world.com/Forum/index.php?topic=9679.msg87931#msg87931

[drumslinger2000]

Hey thanks VMS!  C'mon bnwitt!!  (throwing the dice)

[purpletele]

Hey thanks VMS!  C'mon bnwitt!!  (throwing the dice)

Barry has some nice files, I have the single channel Visio File from his vault. 

I'm sure he will check in soon.

Let me know if you want the file that I have.

BV

[drumslinger2000]

Hey BV,


     That would be awesome.  Please send.


Thanks


C

[sluckey]

You could use Barry's pdf in the link that VMS posted to easily make a Visio file.

[purpletele]

You could use Barry's pdf in the link that VMS posted to easily make a Visio file.

I set drumslinger up with my current work, which was the chassis view with the tubes, board and controls in a visio file.  I think it was what he was looking for, less one channel.

It was incentive for me to finish up my homework so I can build a few things.

However, the process of planning and designing the layout for these amps has become a learning experience itself.  I still have plenty of work to do on the computer before I start assembling anything.

[sluckey]

the process of planning and designing the layout for these amps has become a learning experience itself.

That's true. I enjoy this phase of the amp building process as much as the chassis fabrication or actual soldering.

[bnwitt]

By standard layout I assume you mean the Fender layout?  If so, below is a DropBox link to my recent amplifier photos folder which has info on my last Hoffman Deluxe Reverb build into which I just now threw in an old Visio file of a standard Fender style AB763 board and deluxe chassis.  I haven't used this in years so make sure you verify everything including under board wires as IIRC there might be one missing I don't know.  Compare it to the original Fender layout and schematic.  Please let me know if errors are found.

https://www.dropbox.com/sh/kza6ndrxvvo0c1o/AAAsG45HzSOB3Q8ZPW3UdXaHa?dl=0

Barry

[drumslinger2000]

Excellent!!!  Thanks Barry!!


C