Cap value question

[pbman1953]

I have a Sunn 2000s that had some noise when turning on but worked just fine. But tapping the case had the same noise.


I found that a cap's ground broke free and the lead is too short to be re-soldered.


 This cap is a 20mf at 500 is in parallel with another 22mf at 500. The total is 42mf at 500v. I have a JJ- 80MF at 500. Can I take out both and use the JJ?




Thanks

[shooter]

should be fine, the 30uF might need to stay close to value depending on the Rec tubes finicky factor.

[pbman1953]

Here are the 3 previous stage values




110 at 600


50 at 700


22 at 500


I'm using webber copper caps

[pbman1953]

Any other comments after posting my stage values?