Welcome To the Hoffman Amplifiers Forum

September 08, 2025, 09:49:45 am
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: 1/2 inch flat washer for carling toggle switches  (Read 4119 times)

0 Members and 1 Guest are viewing this topic.

Offline Tone Junkie

  • Level 3
  • ***
  • Posts: 861
Hoffman Amps Forum image
1/2 inch flat washer for carling toggle switches
« on: December 16, 2018, 07:34:27 pm »

I know this is probably the wrong spot to post . In the past I have been able to get flat washers that fit my switches that go in the 1/2 inch hole. I think there actually 15/32 washers . I knew I had a hard time finding them last time but for the life of me. I cant find them now. Anyone have a source
Thanks Bill


Offline Tone Junkie

  • Level 3
  • ***
  • Posts: 861
Hoffman Amps Forum image
Re: 1/2 inch flat washer for carling toggle switches
« Reply #2 on: December 17, 2018, 03:02:41 am »

Pete thank you for those. I don't need the locking washer though. I need a flat washer I use them under my outside nut on the faceplate.
 With humble adoration for all those here who have taught me so much.
Bill
 PS. when I found them last time I knew I should have ordered more than 10

Offline Swampertech

  • Level 2
  • **
  • Posts: 124
  • I love Tube amps
« Last Edit: December 17, 2018, 08:43:25 am by Swampertech »

Offline Swampertech

  • Level 2
  • **
  • Posts: 124
  • I love Tube amps
Hoffman Amps Forum image
Re: 1/2 inch flat washer for carling toggle switches
« Reply #4 on: December 17, 2018, 08:04:06 am »
a pic

Offline Tone Junkie

  • Level 3
  • ***
  • Posts: 861
Hoffman Amps Forum image
Re: 1/2 inch flat washer for carling toggle switches
« Reply #5 on: December 18, 2018, 03:28:43 pm »

Swampertech I like those look a lot better than what I was doing . I think I will use those on my amps from know on.  Found the other ones I was using at pedel parts plus. I forgot that I found them when on a pedal building spree. Tubnit and the others in the pedal section had me on a real run of pedals for a while.
Thank You Bill



Offline Ed_Chambley

  • Level 4
  • *****
  • Posts: 3785
  • Nothing is too old.
Hoffman Amps Forum image
Re: 1/2 inch flat washer for carling toggle switches
« Reply #7 on: December 20, 2018, 09:17:59 am »
Check out https://www.albanycountyfasteners.com


These are the folks I order from when I need something Fastenal doesn't carry.  I looked at the flat washers and you can get the size you need in 7 different materials, including Brass.  Whenever I build a wooden finished combo, I use brass washers and Brass Acorn nuts to install the chassis.  Easy and looks nice.

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password