Hoffman Amplifiers
> Tube Amp Building - Tweaks - Repairs
> Dougs Tremelo Mod
<< Prev Topic | Next Topic >>
Author Comment
Red llamma
Junior tube assistant
Posts: 3
(3/14/04 3:01 pm)
Dougs Tremelo Mod
--------------------------------------------------------------------------------
Hey Guys,
just drawing up some schematics for a modified Super Reverb, and I want to include Dougs Tremelo Mod that doesn't require the Optoisolator as he used on his AB763 board,
Any help would be great
Cheers
Blair
Rotting27
Posts: 125
(3/14/04 10:03 pm)
Re:
--------------------------------------------------------------------------------
Doug's layout of an AB763 IS a Super Reverb with the bias-trem. I mean, there might be VERY small differences in cap values (i.e., .0022uf as opposed to .003uf).
Otherwise Doug's AB763 is identical to a Super Reverb AB763 (minus opto-trem and plus bias-trem).
6G6
Junior tube assistant
Posts: 121
(3/15/04 11:35 am)
Re: Re:
--------------------------------------------------------------------------------
Check out the Fender Feild Guide at
www.ampwares.com/ffg/Scroll down to Brownface Super, click on that, scroll through the pictures (try not to drool on your keyboard), then open the schematic at the bottom.
I think that's what you need.
EL34
I got your parts right here.
Posts: 2261
(3/17/04 10:28 am)
Re: Re:
--------------------------------------------------------------------------------
Look at the black face AB763 Vibroverb schematic in Gerald's Hip tube amp book.
I have the book cheap on this page.
http://www.hoffmanamps.com/MyStore/catalog/parts13.htm << Prev Topic | Next Topic >>
Topic Commands
Click to receive email notification of replies
jump to: Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)
- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -
Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.