Mounting Hoffman Board with standoffs on OT/PT Bolts/Screws

[gheorge77]

I've got a bit of a space issue inside a custom build I'm working on in terms of mounting the board inside the chassis.

Would there be any issues to be concerned about if I used the OT or PT mounting bolts with a standoff to mount the turret board? Would there be a greater risk of interference or hum?  Both OT and PT are standup transformers.

[shooter]

greater risk

 

I've put turret boards directly "under" big OT's, no problem. 

[gheorge77]

I'm more concerned about a direct connection between the tranny bolt and the turret board bolt....I don't think there would be an issue but I figured I'd see if anyone had experience doing that.