6.3 v filament wire question

[Tapsnap]

Is it important to maintain a consistency of the connections of the heater wires so that one wire always connects to the 4 and 5 tube terminals, while the other always connects to the 9s?
Since it’s AC, it shouldn’t matter, right?

[PRR]

It looks prettier if consistent.

[bmccowan]

I do it because I've read in several places that you are supposed to. But, I also twist the wires tightly for the same reason. But take a look at Sluckey's excellent builds.
As the bumper sticker says, Question Authority.

[shooter]

As the bumper sticker says, Question Authority.

ya, but the lyrics say ...."Authority always wins..."   

It matters not on filaments as long as you understand NOT to twist up or lay down sensitive signals with them

[bmccowan]

John's rewrite of Bobby Fuller's I Fought the Law and the Law Won.