Stromberg and Carlson ASR-120 - Replacement transformers?

[txtune]

Glad you're clicking along, I landed in your state, it's FRIGGIN colder than MI!!!  the upside I landed in a place time forgot, no cell/WIFI for 30miles in ANY direction!!   

Yep, my weather station is reading 44 degrees at this moment. If you don't like the weather in Texas, wait five minutes and it will change. 

Did you drive? What part of the state are you in? Be safe!

[shooter]

Is that amp working yet!
Garner SP for 2 weeks, well 1 now.  7miles from Leaky, 37miles from Uvalde
it's sunny and 72 so I'm happy, the 32 at night is fine, i'm asleep in a 10 degree bag 

[txtune]

Is that amp working yet!
Garner SP for 2 weeks, well 1 now.  7miles from Leaky, 37miles from Uvalde
it's sunny and 72 so I'm happy, the 32 at night is fine, i'm asleep in a 10 degree bag 

Yes, it's been working for several weeks. I would like to add a volume control to it at some point.

[sluckey]

Did you clean that board and cruddy wires?

[txtune]

Did you clean that board and cruddy wires?

I got the cleaning supplies today. I also plan to tidy up the wiring I originally installed.

[txtune]

Did you clean that board and cruddy wires?

I decided to create a layout before I get into the board cleaning, see attached. Still working on it, about halfway through the board.

In the case that something breaks, what would be a good way to rebuild this board? -OR- If you had to rebuild this board from scratch how would you do it?

[DummyLoad]

Is that amp working yet!
Garner SP for 2 weeks, well 1 now.  7miles from Leaky, 37miles from Uvalde
it's sunny and 72 so I'm happy, the 32 at night is fine, i'm asleep in a 10 degree bag 

i used to tear through those parts on my speed triple and falco in the triple digits - some nice twisties in that area. garner state park is beautiful. enjoy your visit.


--pete 

[txtune]

I believe the board is correct in this layout.

[shooter]

enjoy your visit.

Thanks Pete, I did, and If I had my rally car, I woulda, but with the redneck camper, it's all I could do to keep it upright at 75mph 




so did you get volume added yet or are you still playing with computer graphics 

[sluckey]

I believe the board is correct in this layout.

What are your plans for the bottom side of the board?