5F1 with 6SL7 and 6BM8 reverb

[isaac_teller]

Hello. I'm building a 5F1 with a 6SL7 instead of a 12AX7. Would I need to up the anode and cathode resistors on the triodes to compensate for the lower gain of the 6SL7? The reverb section will remain unchanged. Several years ago I built it as pictured and it sounded great.
Thank you.


https://music-electronics-forum.com/filedata/fetch?id=841116&d=1456179449

[sluckey]

I've had good results with 120K plate and 2.2K cathode...   http://sluckeyamps.com/RCA/Ampeg_J12B.pdf

Also used 270K and 4.7K...   http://sluckeyamps.com/rocky/rocky.pdf

[isaac_teller]

Thank you.