another A/B/Y schematic

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > another A/B/Y schematic      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
jc
I only work on Fender's
Posts: 667
(1/30/04 7:32 pm)
 another A/B/Y schematic
--------------------------------------------------------------------------------
 This questions seems to come up every now and then so here is yet another A/B/Y
 

Edited by: jc at: 1/30/04 7:33 pm
 
boogielicious
Junior tube assistant
Posts: 51
(1/31/04 9:20 am)
 Re: another A/B/Y schematic
--------------------------------------------------------------------------------
 Thanks JC.

Scott
 
GroundhogKen
Forum Moderator
Posts: 2237
(1/31/04 10:56 am)
 Re: another A/B/Y schematic
--------------------------------------------------------------------------------
 The top picture's input jack looks funny to me. Is the sleeve carrying the signal? Or is it mislabeled?

I assume the idea is to have the battery circuit enabled when you plug a standard 1/4" plug into the stereo jack--the ring gets tied to the grounded sleeve.


Ken
 
jc
I only work on Fender's
Posts: 668
(1/31/04 11:20 am)
 Re: another A/B/Y schematic
--------------------------------------------------------------------------------
 I think you are right Ken. The top A/B is mislabelled. The S is on the wrong side of the jack. They have basically labelled the tip T & S.

It should look like this

 
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.