Fender 5C8 Twin Output Transformer

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Fender 5C8 Twin Output Transformer      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
JimiB
Junior tube assistant
Posts: 37
(3/29/04 11:18 am)
  Fender 5C8 Twin Output Transformer
--------------------------------------------------------------------------------
 I have a 5C8 on the bench and I am suspicious of the OT not being correct, the PT has a Triad sticker #6516 but the OT has metal bell ends and a stamp #2485 does this sound correct? The voltage on the plates of the 6L6's is 428. B+ is 436v but the schematic shows it being 380v?
 
PHATamps
I only work on tube amps
Posts: 431
(3/29/04 9:22 pm)
  Re: Fender 5C8 Twin Output Transformer
--------------------------------------------------------------------------------
 When that schematic was drawn the wall voltage was 110, now it's more like 120-125, so your B+ will be higher than spec. 428V is fine for 6L6s.
 
JimiB
Junior tube assistant
Posts: 38
(3/30/04 12:58 am)
  Re: Fender 5C8 Twin Output Transformer
--------------------------------------------------------------------------------
 cool thanks!
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.