Author Topic: Speaker Turn-On Delay (Read 6589 times)

dpm309 · « **on:** November 17, 2023, 03:24:33 pm »

Looking at installing a Speaker Turn-On Delay board for a Trace Elliot AH150 bass amp. Here is the link to the product page: https://diyaudiostore.com/products/soft-start-speaker-turn-on-delay-and-dc-protector-boards?_pos=1&_sid=6f035846d&_ss=rIt
I need a 12 or 24 V power supply for the board and I do not want to have to install a separate transformer. I need the schematic for the AH150 and have not been able to find it anywhere. Does anyone have this schematic? Also, it looks like the board is for stereo amps. Can I just jumper the speaker in/outs together? Here is the schematic: https://cdn.shopify.com/s/files/1/1006/5046/files/Speaker_Protection_Board_Schematic.jpg
Thanks,Dan

PRR · « **Reply #1 on:** November 17, 2023, 04:35:24 pm »

How someone else did it, with mods for 20V to 70V supply:

https://www.siliconchip.com.au/Issue/2011/October/Build+A+Loudspeaker+Protector

Douglas Self had a well-considered plan but it is not in the 2002 edition of his Power Amp book.

dpm309 · « **Reply #2 on:** November 17, 2023, 05:11:44 pm »

Thanks, PRR. I'll check it out.

PRR · « **Reply #3 on:** November 17, 2023, 05:27:07 pm »

PRR · « **Reply #4 on:** November 17, 2023, 05:30:50 pm »

Welcome To the Hoffman Amplifiers Forum September 05, 2025, 04:25:52 pm

Welcome, Guest. Please login or register. -User Name -Password
Home Help Search Login Register
Hoffman Amplifiers Tube Amplifier Forum » Other Stuff » Solid State » Speaker Turn-On Delay

Choose a link from the Hoffman Amplifiers parts catalog
Mobile Device Catalog Link	Yard Sale Discontinued	Misc. Hardware
What's New	Board Building Parts	Amp trim Handles
Lamps Diodes	Hoffman Turret Boards	Channel Switching
Resistors	Fender Eyelet Boards	Screws/Nuts Washers
Jacks/Plugs Connectors	Misc Eyelet Boards	Tools
Capacitors	Custom Boards	Tubes Valves
Pots Knobs	Fuses/Cords	Chassis
Tube Sockets	Switches	Wire Cable

Welcome To the Hoffman Amplifiers Forum