floating heaters

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > floating heaters      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
ganzonimx
Hey get your own solder
Posts: 445
(3/31/04 8:18 pm)
 floating heaters
--------------------------------------------------------------------------------
 I would like to use a bleeder resistor of the first filter cap to build the voltage divider to float the heaters. This way I would only use one additional resistor and one cap. Would that work?



Cris
 
Tiny Daddy
I will work on all amps
Posts: 582
(4/1/04 4:03 pm)
 Re: floating heaters
--------------------------------------------------------------------------------
 That should work.
 
ganzonimx
Hey get your own solder
Posts: 453
(4/1/04 5:09 pm)
 Re: floating heaters
--------------------------------------------------------------------------------
 OK, I'll go for it...

I...'m still miles away to pulgg in to this amp... mabe in May ore June...

Cris
 
Lucid Alice
Senior tube assistant
Posts: 185
(4/1/04 11:01 pm)
 Re: floating heaters
--------------------------------------------------------------------------------
 Neat idea! Should float at around 5% of B+?
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.