6V6 PP amp idea

[rake]

Guys After the input from my last schematic I tried to get closer to what I'm looking for.
I went over it multible times looking for errors but who knows??? LOL!
Any and all guidence is greatly accepted and appreciated! Thanks in advance!

[tubenit]

Just suggestions to consider.

I think you're gonna need more like a 1M reverb pot if you have a lower value "mixing" resistor of 150k. 

Treble cap in tone stack is 250p not  .250p.

Overall not saying you "should" change what you've done, I'm simply offering how I would approach your idea.

With respect, Tubenit

[pdf64]

Are the mains connectors in your region unpolarised?
If they are polarised, it's best to wire both the fuse and switch in the live feed.
If unpolarised, a double pole switch for both live and neutral, whichever way around they happen to be, is usually mandated.

[ac427v]

Nicely drawn schematic!
Two thoughts.
I don't understand the function/effectiveness of the channel switching. What do you want the switch to do?
The Volume Pot location essentially duplicates the two gain pots. They vary the output of V1. I would enjoy hearing what effect you are seeking to offer alternative placements.
I have not used a 5879. I wonder if it might be better placed earlier in the circuit so it could have it's own volume pot.

[pdf64]

The 5879 suppressor grid needs a DC connection, I think to its cathode is typical.