Have I made a huge mistake?! PR build

[theundeadelvis]

Hey folks, happy new year!


I'm mid panic as I've finished my Princeton Reverb build (works and sounds great) and suddenly I'm wondering if I've made a huge mistake. I've been away from building for years, and decided to get back into it. I built a PR using a Hoffman board, and I when I wired it up, I used 26 gauge bare, tinned bus wire for all the wires connecting turrets. Is 26 gauge too small?


 



Here's the full build: https://imgur.com/a/princeton-verb-VKty7yQ


Thanks in advance!

[Willabe]

No, not when it's doubled up like that.

Fender used 22 gauge for all the signal wire.

[theundeadelvis]

No, not when it's doubled up like that.

Fender used 22 gauge for all the signal wire.

Thank you! I will be able to sleep now.

[Willabe]

It would probably be alright single.

There's not much signal current from the input jack to the power tubes input.

[bmccowan]

And that board is nicely done. I wish mine were always that neat!

[theundeadelvis]

And that board is nicely done. I wish mine were always that neat!

Thank you!