bassman 100

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > bassman 100      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
delux1959
Junior tube assistant
Posts: 89
(4/3/04 12:31 pm)
 bassman 100
--------------------------------------------------------------------------------
 Does any body see a problem in removing the wires that connect the heaters to the hum balance pot on a bassmann 100?www.ampwares.com/ffg/schem/bassman_135_schem.jpg


Edited by: delux1959 at: 4/3/04 12:36 pm
 
ganzonimx
Hey get your own solder
Posts: 457
(4/3/04 12:39 pm)
 Re: bassman 100
--------------------------------------------------------------------------------
 If you drop the hum balance pot you will lose the ground reference for the heater cricuit and you might get hum.

Replace the the pot with two 100 ohm resistors to ground.

Cris
 
Tiny Daddy
I will work on all amps
Posts: 598
(4/3/04 1:09 pm)
 Re: bassman 100
--------------------------------------------------------------------------------
 What Chris said, you can remove the wires but you must then ground-reference the heaters some other way.
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.