Matchless Spitfire inputs

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Matchless Spitfire inputs      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
bluelake boy
Junior tube assistant
Posts: 1
(4/4/04 5:19 am)
 Matchless Spitfire inputs
--------------------------------------------------------------------------------
 I've noticed that a few forum members have built Matchless Spitfire clones. I have a layout and a schematic, and I noticed the schematic specifies isolated inputs. I am planning to use shielded cable grounded at the input end. Are the isolated inputs necessary? I have switchcraft switching jacks or the old style marshall jacks that Doug sells, on hand. (not too sure about how to wire the marshall jacks) Thanks!
 
jc
I only work on Fender's
Posts: 695
(4/4/04 7:22 am)
 Re: Matchless Spitfire inputs
--------------------------------------------------------------------------------
 They will work fine. I used the switchcraft jacks also.
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.