4 ohm fixed attenuator

[isaac_teller]

Hello/ I want to use Robrobinettes 10% attenuator for a 4-ohm speaker. Do I just use half the values in the schematic(8 and 6 ohms instead of 16 and 12 oms) or is it not that easy? Thanx in advance.
https://www.diyaudio.com/community/attachments/10_percent_power_switch_schematic-png.1016108/

[passaloutre]

Yes, that should be fine.

I have one of these (the 8ohm version) built into my 5E3 and I really like it. Enjoy!