Not lazy - just careful? Layout help?

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Not lazy - just careful? Layout help?      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
Jimbo
Junior tube assistant
Posts: 1
(3/26/04 4:52 pm)
  Not lazy - just careful? Layout help?
--------------------------------------------------------------------------------
 Hi,

Can anyone here point me to a good 'known' layout for the AX84 November Rev 8. I am not lazy - just very unsure about layouts and I don't wanna ruin the project on the first day?

Any help appreciated.

James
 
Funkalicousgroove
Junior tube assistant
Posts: 35
(3/29/04 1:33 pm)
  Re: Not lazy - just careful? Layout help?
--------------------------------------------------------------------------------
 email the schematic and I'll see what I can do with it. Funkalicousgroove@hotmail.com
 
Bradster
Posts: 4
(4/6/04 11:00 am)
  November layout diagram from Les Thornton
--------------------------------------------------------------------------------
November layout diagram from Les Thornton 4/12/2003:

ax84.com/media/ax84_m213.pdf
 
heresrobert
Junior tube assistant
Posts: 21
(4/15/04 5:13 pm)
  November board layout
--------------------------------------------------------------------------------
 
I'm almost finished with a home built November. I don't get to work on it as much as I would like so it's a long project. I strongly advise printing off the schematics and layout on the largest paper you have and follow the connections on the circuit board posted on the AX84 website. When you are verifying the board layout, keep in mind where the components you are linking to are located on the chassis (tubes, trannies, choke, pots, sockets, etc). Make sure you account for every piece on the schematic. The November schematic seems easy to read for me, but making sure everything is layed out for a quiet amp might make things difficult. Doug has a lot of good information on amp building. Reading through Doug's information completely and understanding it will help you out a lot when you are examining the layout. I'm actually thinking about building a new board at some point because there are things I want to position differently. When you do order parts, get extras. Keep the group up to date on this. I'm very interested. I hope everyone else is, too.
 
heresrobert
Junior tube assistant
Posts: 22
(4/15/04 5:52 pm)
  Re: November board layout
--------------------------------------------------------------------------------
 I was looking at the linked layout in one of the messages. the one I used is from House of Jim.
members.shaw.ca/house-of-jim/Images/Layouts/November.pdf

I did make some changes for my amp. I'll know how they worked when I using the amp. When I get my layout finalized in a working form, I'll post it.

Robert
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.