When fuses blow???

[Geezer]

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > When fuses blow???      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
crashtm1
Senior tube assistant
Posts: 128
(4/21/04 7:40 pm)
 When fuses blow???
--------------------------------------------------------------------------------
 I have an old JMP Marshall head,,MK2 master..
The 1amp H.T. fuse, which I see is tied to a cap can, keeps blowing as soon as I turn it on... I looked over things very well looking for a short, but see nothing.. Is there something obvious I should check, that I may not see visually?? I'm going to check to see if it does it with the tubes out next..

Thanks,,,
Todd
 
Tiny Daddy
I will work on all amps
Posts: 625
(4/21/04 8:08 pm)
 Re: When fuses blow???
--------------------------------------------------------------------------------
 I suspect shorted power supply diodes.
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.