Welcome To the Hoffman Amplifiers Forum

September 08, 2025, 05:09:56 pm
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: 2 x8 or 10" recomendations?  (Read 4094 times)

0 Members and 1 Guest are viewing this topic.

Offline stingray_65

  • SMG
  • Level 3
  • *****
  • Posts: 926
Hoffman Amps Forum image
2 x8 or 10" recomendations?
« on: January 20, 2010, 10:36:42 pm »
Hi guy's

I'm almost done building a 5F2-A in a head cab for a great friend, has a stancore OT marked 4000 primary and 8 ohm secondary

I am building this as a gift  and he's since seen it before it's done and  has asked that I build a speaker cab with it also.

catch is he's pretty much decided the speaker cab's dimentions for me (has to fit  between his bed and a night stand and put the head at such a level yada yada yada)


OK so the inside measurments on the speaker cab is 12 1/2" tall 16 1/2" wide 7 3/4 deep.

carcas is made from 3/4 baltic birch and the speaker baffle is 1/2 baltic birch , the back is 2 pieces of 1/2 baltic birch that I'll decide later if I want a closed back, ported or open back

SO with that information, what size speakers would you reccomend, I've considered 2x8 either 16ohm parallel or 4 ohm series,  1x10 or maybe a 12?

I think a 12 in a box that small would sound boxy, I could be wrong

any help here would be a Godsend to me


Thanks
My mind is aglow with whirling, transient nodes of thought careening through a cosmic vapor of invention (H. Lamarr)

Offline thermion

  • Level 2
  • **
  • Posts: 489
  • Repeat Of Fender
Hoffman Amps Forum image
Re: 2 x8 or 10" recomendations?
« Reply #1 on: January 21, 2010, 01:32:26 pm »
check this out:
http://www.homerecordingconnection.com/news.php?action=view_story&id=32
looks like you're on the line between 8 and 10 (without knowing Q and V values for the speaker you want to use).
i'd go with a 10. i've not been impressed with many 8's as a stand-alone speaker.

Offline stingray_65

  • SMG
  • Level 3
  • *****
  • Posts: 926
Hoffman Amps Forum image
Re: 2 x8 or 10" recomendations?
« Reply #2 on: January 21, 2010, 09:56:12 pm »
I guess I was thinking about the same thing, a 10" would be better.

it's just I HAD two great little 8's until I stuck my thumb thru the cone of a 1968 CTS while trying to catch it as it fell off my bench, seems the srewdriver was kind of stuck to the magnet :embarrassed:.

so I started looking for a replacement online and realized I could get a decent single 10" for about the same cost.

so I suppose I needed the nudge to abandon my original faulted plan

thnx
My mind is aglow with whirling, transient nodes of thought careening through a cosmic vapor of invention (H. Lamarr)

Offline Direwolf

  • Level 1
  • *
  • Posts: 80
  • Don't murder me...
Hoffman Amps Forum image
Re: 2 x8 or 10" recomendations?
« Reply #3 on: March 28, 2010, 03:34:44 am »
I have a 10" Eminence Ragin' Cajun in an old Marshall cab (Micro Stack). It sounds great and only costs about $65-70. It's rated at 70 watts and I think 100db SPL. I'm building a 1x10 detuned cab for it right now and that'll make it sound even better!
Semper Fi

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password