Hey tubenit.Any schematic for one tube reverb in a 5F2A?

[phsyconoodler]

Tubenit,
  You one tube reverb guru,do you have a schematic for adding a one tube reverb to a 5F2A tweed princeton?I've done the two tube reverb in the past but it actually had way too much reverb.

 

By the way,I thank you for your schematics and constant experimenting that you share with the forum.You are number one in my book!

[tubenit]

Hey Physconoodler,

I have NOT personally built one but there are some DRAFT ideas in the SCH files here:

http://www.el34world.com/Forum/index.php?topic=630.0

I think PRR may have helped with some of this when I was drawing them but can't remember for sure?  I think he advised changing some aspect of it?

Anyhow, here is a GIF of one way that it might be approached. Ignore the James tone stack and substitute a 5E3 type tone stack instead.

With respect, Tubenit

[phsyconoodler]

Thanks a bunch Tubenit!

[keithpop]

Hey guys,
I know this was posted over three years ago but I just built a 5F2A and wanted to do a reverb add-on.  Did this circuit work for you?  What other modifications were required...if any?  I have room for one additional tube and a small board.  I would also need a pretty small spring reverb tank.

I hope you are still monitoring this.....

thanks for your help!
keith