Welcome To the Hoffman Amplifiers Forum

September 08, 2025, 01:42:40 pm
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: Extension speaker jack wiring  (Read 3659 times)

0 Members and 1 Guest are viewing this topic.

Offline Geezer

  • Level 4
  • *****
  • Posts: 3680
  • Groov'n Tube'n KOOK (Keeper Of Odd Knowledge)
Hoffman Amps Forum image
Extension speaker jack wiring
« on: June 17, 2005, 09:29:34 pm »

  Hoffman Amplifiers
    > Tube Amp Building - Tweaks - Repairs
        > Extension speaker jack wiring      
 
<< Prev Topic | Next Topic >>  
Author  Comment  
vinman753
Junior tube assistant
Posts: 96
(2/24/04 9:08 pm)
 Extension speaker jack wiring
--------------------------------------------------------------------------------
 My first amp, i just installed a speaker jack. This time I want to put in the extension jack also. I just want to make sure i have the wiring right. This is an AB763 layout.

The green wire from the OT goes to the SPKR jack. Then it jumps over to the EXT. jack and then to the 820 ohm resistor.
The other two connectors on the SPKR jack are jumped together.
The black wire from the OT connects to the other connector of the EXT. jack.

Believe it or not, I couldn't find this info anywhere except schematics, and I noticed that on a Fender Bassman, the black and green wires are reversed.
Thanks for the time.
 
ganzonimx
Hey get your own solder
Posts: 404
(2/25/04 11:53 am)
 Re: Extension speaker jack wiring
--------------------------------------------------------------------------------
 That's right how you wire the out put jacks. Use a shorting jack for the speaker jack and a normal jack for the extension speaker jack.

You are also right that in the SF Bassman (AB165) the green wire of the OT goes to ground. Thats because the feedback loop inserts direct to the grid of the PI and not to the tail resistor. If the green wire and the black wire would be switched that would cause positive feedback in stead of negative feedback.

Cris
 
vinman753
Junior tube assistant
Posts: 97
(2/25/04 12:54 pm)
 Re: Extension speaker jack wiring
--------------------------------------------------------------------------------
  
Thanks, Ganzo

Edited by: vinman753 at: 2/25/04 12:54 pm
 
 
 << Prev Topic | Next Topic >>

 

 Topic Commands
 Click to receive email notification of replies
  
jump to:  Tube Amp Building - Tweaks - Repairs (New)New Product Suggestions (New)Praises - Complaints - Suggestions (New)Buy - Sell- Trade (New)Archives (New)    
 

- Hoffman Amplifiers - Tube Amp Building - Tweaks - Repairs - Hoffman Amplifiers -



Powered By ezboard® Ver. 7.32
Copyright ©1999-2005 ezboard, Inc.
   Cunfuze-us say: "He who say "It can't be done" should stay out of way of him who doing it!"

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password