A very intriguing new product - WOW

[kagliostro]

Here the final product

http://www.ukcnc.info/forums/coilwinder.php

Here the prototype

CNCDudez CNC Coil Winder

I like this thing very much !

K

[DummyLoad]

nice. ty for sharing.

--DL

[twbranch]

If you can build an amp you can build a coil winder way cheaper than that thing. I built one for school using sourced parts that would have cost about 250us! The counter is difficult but not too bad!

[PRR]

> The counter is difficult

Cheap calculator (good ones don't do this).

Tack wires to the "=" key contacts, to a flipper/finger on the spindle.

Before a wind, hit "C" "1" "+". Then turn. Each "=" increments by 1.

"C" "12345" "-" "1" and turn will count down from 12345 to zero.

[DummyLoad]

what ever happened to good 'ol 7490s and 7447s or 4026/4033s if you're a CMOS smoker...   

--DL

[twbranch]

> The counter is difficult

Cheap calculator (good ones don't do this).

Tack wires to the "=" key contacts, to a flipper/finger on the spindle.

Before a wind, hit "C" "1" "+". Then turn. Each "=" increments by 1.

"C" "12345" "-" "1" and turn will count down from 12345 to zero.

Never thought of that! Good idea!

[kagliostro]

One other way is to build a cam and use one of this



K