Circuit Question

[sdp1234]

I'm not sure if I can post complete schematics but I've attached a couple snapshots from the schematic.  It is from a Spectra 212-T.  I don't understand the schematic.  Typically the output is coming off of pin 6, 1, 3 or 8.  Can someone explain what I'm looking at here.  Looks like the input and output to the stage is in the grid

[John]

Mis-drawn schematic?

[HotBluePlates]

Post the whole schematic (or a link to the full schematic).

I'd assume that each case shows 2 circuits each feeding a single triode grid. I would not interpret that as a grid is being used as both an input and an output.

If it is a drafting error (no plate output drawn, but the intended plate output is drawn at the grid), it might be telling that both files appear to come from the same site ("Musicparts"?). Maybe just don't waste time looking at their schematics...

[sdp1234]

Here is a more complete set of schematics.  I didn't attached the powersupply section.

[HotBluePlates]

Yep, mis-drawn schematics with the plate output drawn at the grid.

[sdp1234]

Thanks for the help.