5e3 kit - filament center tap

[6v6Pin1]

Does the filament center tap (2 100ohm resistors to ground on the lamp) need to be connected to the first power tube, or can it be connected to any tube? I cut the wires too short but I can still reach the second power tube.

[eleventeen]

*Anywhere* in the amp will work fine. Fender connected it to the pilot lamp ass'y, of all places. Probably, the closer to the power supply, the better.

[6v6Pin1]

Ok great, this will be cleaner for me. I will connect second power tube -> Lamp -> 100 ohm resistors -> ground.