Blues Jr Conversion Line Out

[HARodgers]

Hi,
I was just wondering if it was possible to use the second output jack on the blues junior conversion as a line out (to record into a USB audio interface) and if so, what resistor values I would need for this and which lugs I would connect the resistors to?

Also, is it possible to swap the "Meat" control for a presence control, and if so, how would I go about doing this?

Cheers in advance for any help

(Sorry if I've posted this is in the wrong place!)

[2deaf]

It sounds like you have two speaker jacks.  If so, attached is a typical line out arrangement.

The meat control can easily be converted to a presence control as attached.

[HARodgers]

That is absolutely perfect - thankyou!

Would i need any extra resistors to replace the variable that would have been the meat control, or could I use a trimpot to have an internal meat control?

[2deaf]

Would i need any extra resistors to replace the variable that would have been the meat control, or could I use a trimpot to have an internal meat control?

The meat control is gone because we swapped it for a presence control.