Welcome To the Hoffman Amplifiers Forum

September 08, 2025, 02:16:11 pm
guest image
Welcome, Guest. Please login or register.
-User Name
-Password



Hoffman Amps Forum image Author Topic: Treble cut control  (Read 21907 times)

0 Members and 1 Guest are viewing this topic.

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #50 on: January 10, 2019, 03:28:31 pm »
You see , i drink crap white wine... a " joke " ?!

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #51 on: January 10, 2019, 03:31:09 pm »
Sorry... this time  , he gets crap white wine
I don't much care for your smart ass attitude, especially when people are trying to help you. And I really don't like your "spoon feed me" mentality, but it's been fun watching you slobber around. Good bye ace!
Nice to know that a "Global moderator " can snap so quickly , over nothing

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #52 on: January 10, 2019, 03:40:47 pm »

If you don't like to " spoon feed"... then get off this forum... and, I wasn't " slobbering around ".. i needed help , and i appreciated every reply.
« Last Edit: January 10, 2019, 04:12:29 pm by ginger »

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #53 on: January 10, 2019, 04:25:49 pm »
Thanks to everyone who tried to spoon feed me , and help me "learn to  fish" .. and especially to the " Global Moderator".... who's patience , and humor , especially humor , is boundless . I'm drinking Barefoot  crap wine now , while working on a lethal amp .

Offline Ritchie200

  • Level 4
  • *****
  • Posts: 3485
  • Smokin' 88's!
Hoffman Amps Forum image
Re: Treble cut control
« Reply #54 on: January 10, 2019, 05:08:30 pm »
Wow...  Seriously?  Ginger you took a shot at someone trying to help you.  Whether you were kidding or not, a well placed smiley or a hint that you were joking would have gone a long way.  And now instead of apologizing about a misunderstanding, you are telling a Moderator to get off the forum?  You should have stopped typing a long time ago before the beer balls kicked in.  This was an interesting subject/problem with much to learn.  It's a shame it went in this direction.


Jim

My religion? I'm a Cathode Follower!
Can we have everything louder than everything else?

Offline EL34

  • Administrator
  • Level 5
  • **********
  • Posts: 10408
  • wooot!
    • Hoffman Amplifiers
Hoffman Amps Forum image
Re: Treble cut control
« Reply #55 on: January 10, 2019, 06:16:35 pm »
Really odd reaction... i was joking... I appreciate all the advice... just trying humor... I KNOW I need to figure it out myself. Really frightening reaction from a couple of people .


You need to pay attention to what the moderators are saying

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #56 on: January 10, 2019, 07:27:21 pm »
Sorry... this time  , he gets crap white wine
I don't much care for your smart ass attitude, especially when people are trying to help you. And I really don't like your "spoon feed me" mentality, but it's been fun watching you slobber around. Good bye ace!
Nice to know that a "Global moderator " can snap so quickly , over nothing
I DID... A "moderator " said... it's been fun watching me " slobber around " ? What IS that ?!!

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #57 on: January 10, 2019, 07:30:15 pm »
I listen to all you guys... i took no " shot "... Look at what the guy said to me.. over nothing... nothing

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #58 on: January 10, 2019, 07:35:35 pm »
So... if  "spoon feeding " is getting so painful... he  SHOULD go... to preserve his fragile ego

Offline vampwizzard

  • Level 3
  • ***
  • Posts: 501
  • Don't let the magic smoke out of the machines
    • Walbertedwards.com
Hoffman Amps Forum image
Re: Treble cut control
« Reply #59 on: January 10, 2019, 07:48:55 pm »
It can be tough sometimes to tell between a sarcastic joke and a bit of meanness. Imagine if the role was reversed and you took the text of a forum post as an insult. It leads to more insults and infighting. We don’t want that.. we don’t really need that. Ginger you’ve contributed some good posts and I’ve followed them pretty well. The forum is a slower medium of long form communication and is typically more formal, as the posts are more public and meant for archival. I personally understood what you were going for but out of context they can be misinterpreted. The globals  are answering a bajillion complex thought intensive questions a day and may not have the focus for remembering the conversation in the same way as others can.

If we can all take a step back and take a deep breath maybe we can salvage things here. I don’t think anyone’s in need of apologizing.. but less aggressiveness would be appreciated.

Offline vampwizzard

  • Level 3
  • ***
  • Posts: 501
  • Don't let the magic smoke out of the machines
    • Walbertedwards.com
Hoffman Amps Forum image
Re: Treble cut control
« Reply #60 on: January 10, 2019, 07:53:07 pm »
All that being said, matchless style output section.. 1M pot seems to be their standard for a MV.. what frequencies are we trying to cut as a LP filter? Looking for advice on what cap value to use.

Offline bmccowan

  • Level 3
  • ***
  • Posts: 1744
  • Better builder than player
Hoffman Amps Forum image
Re: Treble cut control
« Reply #61 on: January 10, 2019, 08:20:14 pm »
Bravo vampwizzard, I have seen many forums devolve into useless sniping. It's the dark side of the wonderful opportunity the Web gives us to communicate in a relatively uncontrolled fashion. I will say that Sluckey is the most giving of any individual I have seen on this or any other tube forums. Just take a look at the assistance he has given countless others on this forum, or check out his Website and see the pains he goes to to communicate to others the details of his projects. If there is a misunderstanding; fine. But lets try to keep the spirit positive, eh?
Mac
“To my surprise, when I opened my eyes, I was the victim of a great compromise.”
John Prine

Offline 2deaf

  • Level 3
  • ***
  • Posts: 1667
  • Now too deaf for 100 watts
Hoffman Amps Forum image
Re: Treble cut control
« Reply #62 on: January 10, 2019, 09:43:24 pm »
Say . . . uh . . . you're not trying to take away my crown as the forum Adam Henry, are you?

Offline bmccowan

  • Level 3
  • ***
  • Posts: 1744
  • Better builder than player
Hoffman Amps Forum image
Re: Treble cut control
« Reply #63 on: January 11, 2019, 05:59:48 am »
Adam Henry?
Mac
“To my surprise, when I opened my eyes, I was the victim of a great compromise.”
John Prine

Offline davidwpack

  • Level 3
  • ***
  • Posts: 552
  • I love tube amps
    • My music on reverbnation
Hoffman Amps Forum image
Re: Treble cut control
« Reply #64 on: January 11, 2019, 08:06:05 am »
He's related to Sammy O. Brian I think. :icon_biggrin:

Offline Ed_Chambley

  • Level 4
  • *****
  • Posts: 3785
  • Nothing is too old.
Hoffman Amps Forum image
Re: Treble cut control
« Reply #65 on: January 11, 2019, 11:29:19 am »
Say . . . uh . . . you're not trying to take away my crown as the forum Adam Henry, are you?
Buddy, you are still tops.  Thanks for your impedance input cause I was afraid to say, but I am learning more about impedance. 


Ginger, here on the Hoffman forum there are quite a few adults (Excluding Ritchie200 and yours truly) who made their lives in electronics and we have technicians (even me) who need help.  Most of the time we consider the work of building amps and modding our own fun stuff.


When I am working on something I do not know about like the impedance of the 5e3 Phase inverter, and someone like 2deaf or PRR suggest something a simple thanks is in order.  The info the both provided told me exactly the issue and how to work around it.  Starting out as a smartass on forums usually does not work, but after a while Sluckey bitching about me drawing the shit myself and telling me the truth which was I wanted answers without any work.  I began to learn, but I did have to realize I was being helped.

Offline Ed_Chambley

  • Level 4
  • *****
  • Posts: 3785
  • Nothing is too old.
Hoffman Amps Forum image
Re: Treble cut control
« Reply #66 on: January 11, 2019, 11:30:09 am »
Adam Henry?
What cops call an asshole.

Offline bmccowan

  • Level 3
  • ***
  • Posts: 1744
  • Better builder than player
Hoffman Amps Forum image
Re: Treble cut control
« Reply #67 on: January 11, 2019, 11:59:29 am »
Thanks Ed for the tip on Adam Henry. I use to have a good friend who was a cop, sadly he's gone now, but I think he had another slang for this - something like Alpha Hotel maybe? Ok, I'll stop now as I don't want to be an HTW.
Mac
“To my surprise, when I opened my eyes, I was the victim of a great compromise.”
John Prine

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #68 on: January 11, 2019, 02:16:30 pm »
Well... i'm sure S. Luckey  is very intelligent , and he does a wonderful job , on this forum... but , what he said , was hateful... I don't feel like i deserved his weird wrath

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #69 on: January 11, 2019, 02:18:50 pm »
and... I've seen his posts , over the last few years... He has been like this to others
« Last Edit: January 11, 2019, 02:21:25 pm by ginger »

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #70 on: January 11, 2019, 02:27:34 pm »
I f this S. luckey is above everyone... then he shouldn't stoop to our level
« Last Edit: January 11, 2019, 02:31:56 pm by ginger »

Offline bmccowan

  • Level 3
  • ***
  • Posts: 1744
  • Better builder than player
Hoffman Amps Forum image
Re: Treble cut control
« Reply #71 on: January 11, 2019, 02:44:46 pm »
Festivus is over. Lets get on with the amp stuff. Please.
Mac
“To my surprise, when I opened my eyes, I was the victim of a great compromise.”
John Prine

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #72 on: January 11, 2019, 03:25:16 pm »
He needs to move on

Offline ginger

  • Level 2
  • **
  • Posts: 178
  • I love Tube amps
Hoffman Amps Forum image
Re: Treble cut control
« Reply #73 on: January 11, 2019, 03:34:56 pm »
IF I KNEW the answer... i would not have asked a question... and i won't  anymore , as long as S. Luckey , ( keeper of all knowledge ) and a guy who feels like he is not where he wants to be in life , but has to be here , is a "moderator"

Offline Willabe

  • Global Moderator
  • Level 5
  • ******
  • Posts: 10524
Hoffman Amps Forum image
Re: Treble cut control
« Reply #74 on: January 11, 2019, 03:50:26 pm »
Festivus is over. Lets get on with the amp stuff. Please.

            :l2:

"Now for the airing of grevences. I got a lot of problems with you people!" (Georges father.)
« Last Edit: January 11, 2019, 04:33:56 pm by Willabe »

Offline Willabe

  • Global Moderator
  • Level 5
  • ******
  • Posts: 10524
Hoffman Amps Forum image
Re: Treble cut control
« Reply #75 on: January 11, 2019, 04:04:59 pm »
Ginger, you need to stop with the arguing and sniping, now.   

Several members have asked you to stop and move on.

The forum owner has also asked you to tone it down and listen to us, the moderators.

I hope you will decide to stop, move past this and be respectful to all the members and all the moderators.

If you can't or wont, then it's probably best if you stop posting anything at all.

It's up to you on how you choose to behave here, but I can tell you, your right at the edge of our patience.

Maybe past it.

I just really want to thank PRR , for his simple treble bleed ... I'm hunting him down

Sorry... this time, he gets crap white wine.

Not funny at all.

You started this with your, according to you, joking around. I called you on it and I'd call you or anyone else here on it.
« Last Edit: January 11, 2019, 04:31:02 pm by Willabe »

Offline EL34

  • Administrator
  • Level 5
  • **********
  • Posts: 10408
  • wooot!
    • Hoffman Amplifiers
Hoffman Amps Forum image
Re: Treble cut control
« Reply #76 on: January 12, 2019, 07:52:35 am »
ginger is on a 7 day forum ban.

 


Choose a link from the
Hoffman Amplifiers parts catalog
Mobile Device
Catalog Link
Yard Sale
Discontinued
Misc. Hardware
What's New Board Building
 Parts
Amp trim
Handles
Lamps
Diodes
Hoffman Turret
 Boards
Channel
Switching
Resistors Fender Eyelet
 Boards
Screws/Nuts
Washers
Jacks/Plugs
Connectors
Misc Eyelet
Boards
Tools
Capacitors Custom Boards
Tubes
Valves
Pots
Knobs
Fuses/Cords Chassis
Tube
Sockets
Switches Wire
Cable


Handy Links
Tube Amp Library
Tube Amp
Schematics library
Design a custom Eyelet or
Turret Board
DIY Layout Creator
File analyzer program
DIY Layout Creator
File library
Transformer Wiring
Diagrams
Hoffmanamps
Facebook page
Hoffman Amplifiers
Discount Program


password