Matchless Chieftain Reverb layout check

[Tonewolfamps]

I made this from a schematic for a guy who wants to build a "clone" of a Matchless Chieftain Reverb and use a board. A real Matchless is entirely point to point, uses 1 watt carbon comp resistors and heavy duty power resistors on the supply and power tubes. Those parts are difficult to source so it isn't a true clone.  Thought I share my layout to check my work and also get some feedback.
Here's the full size layout:
https://drive.google.com/file/d/1fSteoeLyykP_doaHeZbxwXEpmTEQ6vP5/view?usp=drivesdk
Here's the schematic I used:
https://www.thetubestore.com/lib/thetubestore/schematics/Matchless/Matchless-Chieftan-Schematic.pdf

[Willabe]

If you want help, it would be very helpful to post a schematic for your build.

Too hard to figure out what's right/wrong possibly from a layout drawing.
My mistake.

[kagliostro]

Seems that a schematic link Is on the post

Franco

[Latole]

IMO, OP wish we check if his layout is a copy from the schematic.
Yes schematic is on the post.

[tubenit]

I found the original schematic very difficult to read.    I've tried to redraw it in a manner that is easier for me to follow.   

Assume there may be errors and compare to the original schematic.

With respect, Tubenit

[Latole]

Much better Tubenit .

[ac427v]

Nice Tubenit. Point B in the power supply needs C2.


* Corrected above.  Good catch! Thanks