Adding TMB to a champ clone....

[Stuff4bikes]

I gave one of my old builds to a co-workers son who plays guitar in church.  It is a volume only champ clone but he plays at low volumes and wants to get some "different" tones at low volume....I am not much of a guitar player so I couldn't give much advise other than adding pots....
This is the exact board

[sluckey]

This is a good starting place...

     https://el34world.com/charts/Schematics/files/Fender/Fender_champ_aa764_schem.pdf

[Stuff4bikes]

Guess I should have done a little research first.....thank you...

[Willabe]

Another thing you can do is either put in a switch to disconnect the -feed back loop (-FB) or use a pot to dial in full -FB all the way down to no -FB.