DeArmond R15T schem ?

[worth]

I'm seeing the volume pots as being 350K , and the treble pot 650K.... correct, or not ?

[Tone Junkie]

yea Ive never seen a schematic that read .35M before but that would be 350k so correct as far as I can tell.
Thanks Bill

[DummyLoad]

yes, pots are 650K and 350K.

make a 650K use a 1M pot paralleled with a 1M8 resistor.

make a 350K use a 500K pot paralleled with a 1M2 resistor.

--DL

[moonbird]

Hi all --

Appears that Mercury Mag DOES supply PT & OTs for the push pull Dearmonds - I am attaching files. No SE OT though  . Oh well there are MUCH cheaper options for that  .

[worth]

The HV secondary is too high on the Toneclone to match the voltages on the schematic, ( if Martins' voltages are correct )... I'm thinking more like 260-275 V.

[Willabe]

It also has the 6.3 @ 5A?   2 - 6V6's = .9A, 3 - 12_ _7's =.9A, so .9A + .9A = 1.8A.

Might be they have their spec sheet's mixed up?


           Brad          

[worth]

I read that the transformers were beefed up to allow for the use of 6L6s' or 6V6s'.

[Willabe]

Yeah but, 2 x 6L6's = 1.8A, so 1.8A + .9A = 2.7A. Still 2.3A extra, almost double in reserve.


            Brad