Grounding ? for a AB763 Reverb and Output jacks

[x44d80]

Newbie here.  On the AB763 layout, would it cause a ground loop by tying a buss wire from the reverb and output jacks all the way back to the power transformer? I see on the layout that the reverb transformer's black wire ties to the reverb jack. Then I have the rest of the RCA jacks and the output jacks tied together with a buss wire, but then I continued it all the way to the Power Transformer.  Is this wrong? Thanks, Brent.

[Willabe]

Welcome x44d80!

I would say yes if the jacks are not insolated/isolated. You only need to wire them to a ground buss wire if the jacks are not grounded to the chassis.

Read this it might help you.

http://www.valvewizard.co.uk/Grounding.html


             Brad    

[x44d80]

Thanks Brad and thank you for the link. Brent